Loading... Please wait...
CATEGORIES
You Recently Viewed...
- Home
- Lighting Solutions
- BALLASTS
- Continuous Dimming Ballasts
- 3 lamp T8 32W linear fluorescent ballast: (BF=1.0) 100-10% Continuous Dimming using standard 0-10V input control
3 lamp T8 32W linear fluorescent ballast: (BF=1.0) 100-10% Continuous Dimming using standard 0-10V input control
Product Description
Program Rapid Start Dimming Ballast for T8 Linear Fluorescent High output (BF=1.0) and Standard Light Output Applications
100-10% light level continuous dimming with 0-10V Control for Energy Saving Applications
The ELB Plus High Light (BF=1.18) output ballast is the dimming solution for High Lumen fixture applications. Use the ELB Plus high light output ballast in High Bay fluorescent fixtures or in Retrofit applications where lamp reduction (4-lamp to 3 or 2 lamp) is preferred.
The 100-10% dimming range provides an excellent solution for achieving energy targets required in the new energy codes. Excellent for day lighting, load shed and standard load curtailment applications. Products comply with ASHRAE 90.1 requirements for load reduction.
Need less light then set the Maximum (Ballast Factor) power levels to achieve specific project lighting requirements. Compensate for lumen depreciation and save an additional 15 to 20% energy use.
Supports industry standard 0-10V controls.
Additional Features / Benefits:
- No field programming required
- Optional settable max and min light levels stored in the ballast
- Cost effective product solution to meet Energy payback models
- Multi-volt 120-277VAC ballast operation
- Controlled using standard 0-10V lighting control devices
- Retrofit or New construction applications
- Programmed start lamp operation for extended lamp life
- UL Approved
ELB Electronics business philosophy is to provide affordable ballast solutions for the Lighting Energy Market allowing for expanded project use. All products are covered under an industry standard 5year product warranty.
The ELB Plus Dimming Ballast 0-10 Volt control input is compatible with existing control devices (Occupancy sensors, manual control switches, daylight sensors, etc.) designed for operation with the Mark VII, Helios and other dimming ballasts. The 0-10V Control wiring can be installed as a Class 1 or Class 2 installation based on installation and local and national electrical codes.
